Loading... Please wait...  Loading... Please wait...

Categories

Our Newsletter


7.5 Cu Ft Vacuum Degassing Purging Vacuum Oven

  • 3.2 CF vacuum oven
  • Image 2
  • Image 3
SKU:
AccuTemp-75
Weight:
500.00 LBS


Product Description

7.5 Cu Ft  Vacuum Degassing Purging Vacuum Oven 

22x23.5x25"570°F

Oven specifications

 Power
 110V 50/60Hz single phase 13.6A
 Power connection  US standard 3-prong plug (NEMA 5-15P)
 Heaters  1500 watts. Built inside three aluminum shelves for
 the fastest, most energy efficient and most even heating.

 Chamber material  Stainless steel
 Temperature controller  Low proportional gain, PID control for heater output
 by microcomputer
 Temperature range  Ambient to 480°F (570°F Max for less than 30 minutes)
 Temperature units  Fahrenheit or Celsius
 Temperature accuracy  +/- 1°F
 Dwelling timer range
 1-9999 minutes
 Chamber dimensions 
 22 x 23.5 x 25" (WxDxH) divided into three 22 x 23.5 x 7" 
 (WxDxH) sections, which arranged vertically.
 Shelf
 Three non-removable aluminum heating shelves with individual in-oven
 temp sensor, heater and controller (additional stackable shelves available)
 Unit dimensions
 35 x 31 x 38" (WxDxH)
 Shipping dimensions
 38 x 35 x 43" (WxDxH)
 Vacuum level

 Better than 500 microns/millitorrs

 Maximum vacuum 

 29.9" Hg (may vary base on your altitude, click here to learn more)

 Vacuum gauge

 0 to 30" Hg

 Vacuum connector
 KF25/NW25 flange
 Door gasket material  Silicone
 Observation window  Heavy duty 3/4" tempered safety glass
 Unit/shipping weight  400/500 Lb
 Safety
 Built-in circuit breaker

 

 

The new Across International AccuTemp-75 series digital vacuum oven features a gigantic 7.5 cubic feet easy-to-clean stainless steel chamber with a large 3/4" tempered glass safety window. With our new internal shelf heating technology, each shelf in these ovens has its own heater, in-shelf temperature sensor and temperature controller, together with great thermal-conducted aluminum and our new low proportional controller technologies, the result is perfect uniformity, accurate temperature, super fast heating rates, minimum heat loss/exterior temperature and very low power consumption.

Every one of our vacuum ovens goes through a 24-hour vacuum leak, and is quality controlled in New Jersey before leaving our warehouse.

Features
  • Three aluminum heating shelves with individual in-shelf temperature sensor, heater and digital temperature controller.
  • Best choice for the curing and converting of oil extracts. With deep vacuum level, they can operate at temperatures which allow the degassing/purging process to occur rapidly, thus increase productivity and allow for the production of superior quality products with minimal processing time.
  • Dual layer observation window with 3/4" tempered safety glass.
  • 3" thermal insulation prevents heat loss and minimizes the enclosure's outer surface temperature.
  • Easy-to-clean stainless steel interior for exceptional durability and ease of maintenance.
  • Adjustable-force latch and one-piece door sealing gasket maintain consistent vacuum level.
  • Advanced PID controls decrease the heating time up to 50% compared to traditional drying ovens.
  • A vacuum environment lowers the boiling point (great for processing heat sensitive materials) and reduces drying time for materials like paste or powder which cannot otherwise be easily dried.
  • Built-in inch mercury vacuum gauge and circuit breaker.
  • Built-in check valve prevents vacuum oil back flow. 
  • Built-in alarm alerts you when oven has been shut down by safety circuitry due to out of range temperature.
  • Built-in swivel casters with locks for ultra portability.
  • For improved temperature tracking, run the auto-tune procedure as outlined in the manual.
  • All ovens shipped from our New Jersey headquarters for quick delivery and come with one year warranty and lifetime US-based parts and service support.
  • Guaranteed US based phone and email assistance within 30 minutes from our engineers.

Manufactured in accordance with

  • ISO 9001:2000
  • ISO 12100-1:2003, ISO 12100-2:2003
  • EN1050:1996, EN294:1992, EN60204-1:2006
  • CE

e-at32-components.jpg

 

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...





Vacuum Pump Supply LLC