Product Description
Alcatel 2008A MAJOR REBUILD KIT 52613FR for ALCATEL 2008A, Varian SD 200 and PRECISION DD195.
CLICK ABOVE FOR FULL PARTS LIST
This major repair kit is designed to fully rebuild Alcatel/Adixen 2008A vacuum pumps. Replacing vanes, seals, gaskets, springs, and internal components restores vacuum performance, reduces oil contamination, and extends pump life.
Kit Includes
Vanes
Valve & Control Components
- 52750 – Anti-Suckback Lever (Qty 1)
- 52541 – Valve Spring (Qty 3)
- 52557 – Exhaust Clapper, Viton (Qty 1)
- 52642 – Exhaust Clapper, Buna (Qty 1)
- 52655 – Discharge Valve (Qty 3)
- 52562B – Gas Ballast Valve, Buna (Qty 1)
- 52563 – Gas Ballast Spring (Qty 1)
- 52564 – Ball Spring / Gas Ballast Ball Spring (Qty 1)
- 82522 – Gas Ballast Ball (Qty 1)
Drive & Mechanical Components
- 52553 – Elastic Coupling (Qty 1)
- 53040 – Vane Spring (Qty 6)
- 71050 – Dowel Pin (Qty 1)
- 71161 – C-Clip (Qty 1)
- 83653 – C-Clip (Qty 2)
- 54071 – Retaining Pin (Qty 1)
Gaskets
O-Rings & Seals
- 84149 – O-Ring Viton 8 x 2 mm (Qty 2)
- 82105 – O-Ring Buna 5 x 2 mm (Qty 1)
- 83633 – O-Ring Buna 38 x 2.5 mm (Qty 1)
- 79238 – O-Ring Buna 28 x 5 mm (Qty 1)
- 82033 – O-Ring Viton 82 x 2 mm (Qty 5)
- 82120 – O-Ring Viton 8 x 2 mm (Qty 1)
- 82122 – O-Ring Viton 8 x 2 mm (Qty 1)
- 82063 – Shaft Seal Viton (Qty 4)
Washers & Hardware
- 73339 – Flat Washer M4 (Qty 3)
- 73460 – Wave Washer M6 (Qty 9)
- 73461 – Wave Washer M8 (Qty 6)
- A71211 – Nut (Qty 4)
- A71214 – Nut (Qty 3)
Misc Components
Recommended Add-Ons
- Vacuum Pump Oil: Use VPL M100 Oil (5L) or VPL M68 Oil (5L).
- Flushing Fluid: FF-005 Flushing Fluid
For best results, replace oil and clean the system prior to rebuild. Proper maintenance helps maintain vacuum performance, reduce wear, and extend service life on Alcatel 2008A vacuum pumps.
