Product Description
FX - IE3 ASIA 60Hz
New EH2600 mechanical booster • Part A30708934
The Edwards EH2600 mechanical booster uses a hydrokinetic drive so it can assist pump-down from atmospheric pressure while providing automatic overload protection. This page covers part A30708934.
Features
- Hydrokinetic drive can reduce total pump-down time by up to 50%
- Automatic overload and overheating protection
- No bypass line, pressure switch or inverter required for standard installation
- HC hydrocarbon-oil and FX PFPE-prepared configurations
Performance Graph
The graph is a VPS presentation of published Edwards family data. Confirm operating point, backing-pump capacity, process gas and motor selection before ordering.
Technical Specifications
| Specification | Value |
|---|---|
| Model | EH2600 |
| Part number | A30708934 |
| Selected configuration | FX - IE3 ASIA 60Hz |
| Nominal displacement | 2,590 m³/h (1,525 cfm) at 50 Hz; 3,110 m³/h (1,830 cfm) at 60 Hz |
| Maximum pressure differential | 120 mbar (90 Torr) at 50 Hz; 67 mbar (50 Torr) at 60 Hz |
| Inlet connection | DN 160 ISO-F |
| Outlet connection | DN 100 ISO-F |
| Motor / drive | 11 kW / 15 hp |
| Cooling | Water cooled; 250 L/h (1.1 gal/min) nominal requirement |
| Sound level | 75 dB(A) |
| Typical weight | 882 lb (401 kg) |
| Typical dimensions | 1,156 × 522 × 479 mm (L × W × H) |
| Lubricant capacity | 3.5 L gear case; 6.5 L coupling cover; 0.15 L shaft-seal reservoir |
| Ultimate pressure | 10 Pa nominal |
| Protection | IP44 |
Available Configurations
| Part number | Configuration | Electrical / drive | Gas flow | Availability |
|---|---|---|---|---|
| A30705934 | HC - IE3 ASIA 50Hz | 3Ph 200V 50Hz | Standard EH flow orientation | Call for Pricing |
| A30705945 | HC - IE3 EU/CN 50Hz | 3Ph 380–400V 50Hz | Standard EH flow orientation | Call for Pricing |
| A30706934 | HC - IE3 ASIA 60Hz | 3Ph 200V / 380V 60Hz | Standard EH flow orientation | Call for Pricing |
| A30706946 | HC - IE3 US 60Hz | 3Ph 230/460V 60Hz | Standard EH flow orientation | Call for Pricing |
| A30707934 | FX - IE3 ASIA 50Hz | 3Ph 200V 50Hz | Standard EH flow orientation | Call for Pricing |
| A30707945 | FX - IE3 EU/CN 50Hz | 3Ph 380–400V 50Hz | Standard EH flow orientation | Call for Pricing |
| A30708934 | FX - IE3 ASIA 60Hz | 3Ph 200V / 380V 60Hz | Standard EH flow orientation | This configuration |
| A30708946 | FX - IE3 US 60Hz | 3Ph 230/460V 60Hz | Standard EH flow orientation | Call for Pricing |
| A30741935 | EH2600T3 ATEX | 3Ph 230/400V 50Hz | Standard EH flow orientation | Call for Pricing |
| A30779900 | EH2600T4 ATEX | 3Ph 380–415V 50Hz | Standard EH flow orientation | Call for Pricing |
Maintenance, Oil & Repair Kits
| Item | Guidance |
|---|---|
| Lubricant | PFPE-prepared pump: use Fomblin Y VAC 16/6 or the approved Edwards PFPE fluid specified for the exact part number. Oil is ordered separately. |
| VPS service kit | EH2600/EH4200 major kit — part 30751800 |
| Service note | The process chamber is dry. Gearbox, coupling-cover and shaft-seal reservoirs still require the correct lubricant. |
Applications
Mechanical boosters are used to increase pumping speed and reduce pump-down time in industrial vacuum systems. Typical duties include heat treatment, metallurgy, vacuum coating, chemical processing, steel degassing, vacuum drying and large chamber evacuation. Final performance depends on the backing pump and system conductance.
VPS Resources
Need help sizing the booster system?
Send the required pumping speed, pressure range, backing pump, process gas, voltage, frequency, gas-flow orientation and seal requirements. VPS will help confirm the correct part number.
