Product Description
Leybold OEM Buna Seal & Gasket Kit for SOGEVAC SV280 - 97196641
Overview
Seal 97196641 for SV280.
Use the exact part number and pump identification plate to confirm compatibility before installation.
Complete Bill of Materials
Only exact, confirmed Vacuum Pump Supply product pages are linked. Unlinked part numbers remain in the table for an accurate kit record.
| Part Number | Description | Qty |
|---|---|---|
| 300074 | Copper Crush Gasket, 12 mm | 8 |
| 300073 | Copper Crush Gasket, 10 mm | 6 |
| 300043 | Gasket | 1 |
| 300042 | Gasket | 1 |
| 300041 | Gasket | 4 |
| 23970106 | O-Ring,Viton,13.3 X 2.4 MM | 2 |
| 300075 | Copper Crush Gasket, 14 mm | 12 |
| 300076 | Copper Crush Gasket, 16 mm | 8 |
| 300077 | Copper Crush Gasket, 18 mm | 2 |
| 320183 | O-Ring,Buna,52 x 2.5 mm | 3 |
| 71223182 | Shaft Seal, Viton - 32 x 47 x 7 mm | 1 |
| PL71001522 | Shaft Seal, Viton - 28 x 40 x 7 | 2 |
| PL71436722 | O-Ring,Buna,117.07 X 3.53MM | 1 |
| PL71223182 | Shaft Seal, Viton - 32 x 47 x 7 mm | 1 |
| PL71015473 | Seal, Anti-Suckback Valve | 1 |
| PL71217402 | O-Ring,Buna,22 X 3 MM | 2 |
| PL71217332 | O-Ring,Buna,32 X 3.5 MM | 1 |
| PL71213273 | Gasket | 1 |
| PL71213243 | Diaphragm | 1 |
| PL71036722 | O-Ring,Buna,27 X 2.5 MM | 1 |
| PL71032252 | O-Ring,Buna,28 X 3 MM | 2 |
| PL71018048 | Joint Plate Gasket | 1 |
| PL71017993 | Relief Valve Seal | 2 |
| PL71017854 | Joint Plate Gasket | 1 |
| PL71017702 | O-Ring,Buna,148.83 X 3.53MM | 2 |
| PL71046164 | Gasket | 1 |
| PL71046292 | O-Ring,Buna,27 X 2 MM | 3 |
| PL71212473 | Gasket | 1 |
| PL71212503 | Float Valve Seal | 1 |
Compatible Pump Models
- SV280
Product Details
| Part Number | 97196641 |
|---|---|
| Product Type | Seal |
| Compatible Brand | Leybold |
| Pump Family | Sogevac |
| Compatible Models | SV280 |
| Classification | OEM |
OEM Cross Reference
| Leybold OEM Part Number | 97196641 |
|---|---|
| Classification | OEM |
Use the pump parts diagram and model/serial information to verify any manufacturer cross reference.
Recommended Oil
For the standard mineral-oil SOGEVAC configuration shown on this page, use Leybonol LVO 130 (larger size). If the pump nameplate or manual specifies PFPE, ester, DOT 4, or another special fluid, do not substitute or mix fluids. Confirm with the Leybold oil cross-reference.
When Should This Be Replaced or Rebuilt?
Plan service when the pump can no longer hold its specified ultimate pressure, shows rising noise or temperature, leaks oil, or reaches its scheduled maintenance interval. Inspect hard parts before reassembly.
Resources
Related Products
Why Buy From Vacuum Pump Supply?
- Vacuum pump specialists since 2006
- OEM and OEM-equivalent options
- Technical support from vacuum pump specialists
- Direct access to repair parts, oils, and service resources
FAQ
Will this fit every Leybold SOGEVAC pump?
No. Fitment is part-number and model specific. Confirm the pump model and serial number.
Should I replace the oil during service?
Yes. Use fresh oil of the grade and quantity specified by the pump manual.
Fitment and Product Classification
This is a genuine Leybold OEM product.
Confirm part number 97196641, pump model, and serial number before ordering. Email Vacuum Pump Supply if you need help confirming fitment.
