NEW Edwards RV5 Vacuum Pump
1-phase 115/230 V. 4 CFM Rotary Vane Pump
This is the PFPE version of the pump.
Edwards RV5 pumps pack a punch in a small sized unit. These pumps give you incredible performance while taking up minimal space. Easy to set up and use, these are great for lab applications. Pulling deep vacuum while running very quietly!
1 year warranty.
Edwards RV5 Overview
Edwards RV5 Vacuum Pump Technical Data
|50Hz||5.8 m3h-1 / 3.4 ft3min-1|
|60Hz||7.0 m3h-1 / 4.1 ft3min-1|
|Speed (Pneurop 6602)|
|50Hz||5.1 m3h-1 / 3.0 ft3min-1|
|60Hz||6.2 m3h-1 / 3.7 ft3min-1|
|Ultimate pressure||2.0 x 10-3 mbar / 1.5 x 10-3 Torr|
|Ultimate pressure GB I||3.0 x 10-2 mbar / 2.3 x 10-2 Torr|
|Ultimate pressure GB II||1.0 x 10-1 mbar / 7.5 x 10-2 Torr|
|Ultimate Pressure with Fomblin®||2.0 x 10-2 mbar / 1.5 x 10-2 Torr|
|Max inlet pressure for water vapour||50 mbar / 38 Torr|
|Max water vapour pumping rate – GB I||60 gh-1|
|Max water vapour pumping rate – GB II||220 gh-1|
|Max allowed outlet pressure||1 bar gauge / 14 psig|
|Max allowed inlet and gas ballast pressure||0.5 bar gauge / 7 psig|
|Motor power 50/60Hz||450 / 550W|
|Power connector 1-ph||IEC EN60320 C13|
|Nominal rotation speed 50/60Hz||1500 / 1800rpm|
|Weight (without oil)||25 kg / 55 lb|
|Oil capacity min/max||0.42/0.7 litres|
|Noise level||48 dB(A) @ 50 Hz|
|Operating temperature range||12 – 40 °C|
Edwards RV5 Vacuum Pump Technology
The pumps have the unique ability to deliver excellent ultimate vacuum in both high vacuum and high throughput modes with or without gas ballast. This gives the user an unrivalled opportunity to select the optimum pumping performance without compromising the application.
In its high vacuum mode, the RV pump is ideal for analytical instruments, electron microscopes, physics research, backing turbo pumps, TV tube pumping and leak detection applications. Configure the same pump in the high throughput mode, and it becomes suitable for mass spectrometer inlet systems, distillation, laboratory furnaces, backing vapor pumps, solvent concentration, freeze drying and other drying applications.
The simple to use mode selector and accessible, three-position gas ballast control allow the pump to be reconfigured at any time, even when the pump is running.
Some Edwards RV5 Features and Benefits
48 dBA and intrusive frequencies minimised.
Dual mode. Suitable for high throughput and high vacuum applications.
Easy-to-use gas ballast.
Fast acting inlet valve for system protection.
High torque, dual voltage/dual frequency motor, electronic start relay.
Efficient high pressure lubrication.
Oil-tight with printed gaskets, effective shaft seals.
Clamped-in sight glass.
Oil box well contains filling spills.
Hi-tech polymer blades, large diameter, easy-clean oil passages.
Consistent, built-in quality, cast bar construction.
Edwards RV5 Applications:
Centrifuges, ultra-high speed
Degassing/curing - oil, epoxy resin
Gas bottle filling/emptying
Glove boxes, ovens
Laboratory bench top vacuum
Leak detectors, Helium
Load locks and transfer chambers
Research and development
Rotary, centirfugal evaporators
Scanning electron microscopes - SEM
SEM/FIB (ion beam repair)
Surface science instruments
Turbomolecuar backing pumps